AA4400X water cooler

A mains fed water cooler that offers reliability, strength and performance

AA4400X plumbed in water cooler


  • Solenoid push button taps which light up on touch
  • A backlit logo panel enables you to show your own company logo in light
  • Integral cup holder
  • Typically taller than other water coolers, the dispensing taps are at a more ergonomic height
  • Antimicrobial HygienGuard
  • Technology inhibits bacterial growth where it matters most – at the dispensing point
  • Floor standing and table top

Water Options

  • Hot
  • Ambient
  • Cold

Recommended Environments

Mains fed water supply required

  • Offices
  • Leisure
  • Healthcare
  • Industrial

Product Specifications

Product Dimensions and Weight

Floor Standing: Height 1135mm, Width 340mm, Depth 340mm, Weight 18kg

Table Top: Height 460mm, Width 340mm, Depth 340mm, Weight 15kg

Power Supply

Power Supply:  220 Volt, 50/60 Hz.

Provided with a 3 pin plug and 180 cm power cord

Cooling, Heating and Filters
Refrigeration System
  • Quiet, air cooled static-type condenser.
  • No fan required.
  • Protected against motor overload.
  • Unit hermetically sealed.
  • R-134a refrigerant Cooling System.
Cooling System
  • Stainless Steel 3 litre cold water tank.
  • Thermostatically controlled to 4C – 12C
Heating System
  • Stainless Steel 2 litre tank.
  • Thermostatically controlled to between 87 and 92ºC
  • Designed to prevent total drainage for heating element protection.
  • Easily accessible hot water tank drain at the back of the Cooler

POU Coolers are often fitted with a 1 micron nominal size Carbon Block Filter which removes the taste and smell of chlorine, a host of heavy metals/ chemicals and some pathogens which are unable to pass through the 1 micron nominal Carbon Block pore size

Product Specifications
New HygieneGuard Tap Cover

The most critical hygiene area is undoubtedly the tap, which often gets contaminated through user hand contact (by comparison the “waterside” is much less critical). A silver impregnated plastic tap cover is designed to stop bacterial growth from contact contamination. The HygieneGuard tap cover can easily be replaced.


Cold-rolled 20 gauge embossed steel with baked on acrylic enamel finish

Drip Tray

Lift out design which can be connected to mains drainage, High impact durable plastic. Removable anti splash grid


Modern push and hold solenoid taps replace the old fashioned manual taps. The push and hold action prevents leaving the tap running by mistake whilst operating as a safety tap mechanism at the same time. The spouts of the solenoid taps are protected by the new HygieneGuard tap covers. Their silver impregnation is designed to prevent hand to tap bacterial contamination

Cup Holder

Integrated cup holder with exposed locking nuts to open up for easy refilling of cups. Removable Lower Front Panel
Spring loaded lower front panel. Remove drip tray and simply press down to remove entire lower front panel for easy access

Get a quote for a AA4400X

Our privacy policy applies to any information submited

Get advice and recommendations by calling our friendly team.

0344 579 3999